HYSTERESIS
INTRODUCTION
This component allow to build a Thermostat like function that can be applied in various scenanigans, such as: turning on a group of light based on the Lux value coming from a sensor, with this logic you can apply also a hysteresis values that will be taken from the logic.
USE CASES
- The user wants that the garden lights needs to turn on when the twilight starts;
- The user wants that when the Humidity threshold get higher than the max set value the dehumidifire needs to be truned on.
- The user wants to turn On a group of lights based on the value of a Lux sensor. Click here to check out the example guide.
COMPONENT’S PROPERTIES
Enable: Add a switch component to Enable or Disable function to the Hysteresis component;
Limit: Add a Changeable Value, Setpoint or an Info component to set a limit value to the Hysteresis function;
On / Off validation times: These two time value will be applied once the Limit value is reached, and will delay the triggering of the output component component;
Upper / Lower offset values: These two values will be considered once the Limit is reached or is lower than the current lower offset value set;
Output: Link a Switch component that will be triggered based on the values set above;
Sensor: Link a Changeable Value or an Info component that will be considered as an external sensor value.