VIMAR INTERCOM INTEGRATION WITH ILEVIA

INTRODUCTION

Intercom systems are communication devices designed for instant, two-way audio exchange within specific areas. They typically consist of a master station and multiple sub-stations, allowing direct communication without the need for external networks. This guide explains how to integrate a Vimar intercom (Model: 41007, Firmware ver.: 0.5.030D0D010E).

Intercom configuration

Step 1:

Connect to the Vimar web interface. 1. Then enter the SIP line menu 2. and set a User ID of your choice, then a password and finally set the SIP Domani by entering the IP address of the Ilevia server.

SIP configuration within the Vimar intercom software configuration.

Step 2:

Add a new user that will answer the phone. Access the Phonebook menu and click Add user, then add the primary name of your choice, then choose SIP Number then finally set the call number also of your choice.

Adding a new SIP user within the phonebook of the Vimar Intercom.

Ilevia Manager configuration

Step 1:

Open the configuration software Ilevia Manager. 1. Open the SIP tab from the Components library, 2. Add 1 SIP Group and 2 SIP Client.

Adding the SIP component within the Ilevia project.

Step 2:

Enter the parameters of the SIP Group. Here add the SIP address previously set up on the Fermax Intercom and the Ilevia’s IP address separated by a “@” sign as follows: <SIP-Address>@<Ilevia-server-IP-address> where “SIP-address” needs to be replaced with the actual SIP address created earlier within the Intercom web interface and <Ilevia-server-IP-address> needs to be replaced with the real Ilevia server’s IP address.

SIP group component configuration within the Ilevia manager software.

Step 3:

Select the first SIP Client component. Add the SIP address with the right SIP ID, the SIP ID is a specific number of your choice. This first SIP Client component represents the Ilevia control app client that will receive the call once the bell is rang. Lastly Add the Admin tag, this tag allows the Ilevia control app client to subscribe to the SIP client list.

SIP client ID configuration within the Ilevia's configuration software.

Step 4:

Access the second SIP client.

1. Seleziona “Vimar SIP 41007” on the Intercom model.

2. Enter the Intercom IP address with the following syntax: <SIP ID>@<SIP intercom address> and finally add the <SIP password>.

SIP client component within the Ilevia's progect.

Step 5:

Finally add the second SIP Client component that represents the Ilevia Control App inside the SIP group‘s SIP client list.

Adding the sip client within the SIP group component list.

Interface visualization

Step 6:

Click the button on the Intercom to make a call. If the configuration has been done correctly you will receive a notification if the app is closed or a calling interface will open where you can accept or refuse the call.

Call screen