by Filippo Amabilia | Apr 9, 2020 | All Archives, All Archives, Configuration Software, Configuration Software
KNX GATEWAY GATEWAY’S PROPERTIES Name: Enter the title for your KNX gateway; Protocol: Choose the protocol to match with the gateway; Enable: It allows to enable /disable the selected gateway; Device: Select the type of device, this option depends on which...
by Filippo Amabilia | Apr 9, 2020 | All Archives, All Archives, Configuration Software, Configuration Software
GATEWAYS / PROTOCOLS INTRODUCTION The “gateway” performs the function of the translator: it allows communication between protocols of any type. A gateway typically consists of a physical device that converts various types of BUS (KNX / EIB, RS485, RS232) to Ethernet...
by Filippo Amabilia | Apr 9, 2020 | All Archives, All Archives, Configuration Software, Configuration Software
Shutter INTRODUCTION It allows you to control shutter actuators. USE CASES You will need this component in case having a shutter to control or blind. This component allows you to open close and set the rotation of the blinds with only a click. COMPONENT’S...
by Filippo Amabilia | Apr 7, 2020 | All Archives, All Archives, Configuration Software, Configuration Software
Seeker INTRODUCTION Used to call two scenarios with a dedicated graphics component. For example, to switch to a previous and next track of a CD player. The scenarios may be of any type, they can send different infrared or call the component feed track Vivaldi...
by Filippo Amabilia | Apr 7, 2020 | All Archives, Configuration Software
Changeable Value INTRODUCTION This component is similar to the slider component. However, it shows the actual component’s value on the BUS rather than being a percentage. It may indicate a level of LUX of a sensor. It can also be used to set a brightness threshold to...
