HOW TO RESTORE FACTORY IP SETTINGS
(STATIC/DHCP)
PREPARE YOUR
USB KEY
Step 1: Format a USB Key in FAT32.
Step 2: Download the latest version of the file: STATIC IP or DHCP IP.
Step 3: Extract the files from the zipped archive.
Step 4: Drag and drop the eve.settings.txt inside the formatted USB.
Step 5: Remove the USB from the PC and plug it in your X1 server.
Step 6: You can start/stop services to apply settings in the file, or simply restart the system.
Step 7: After you’ve restarted the system, wait 20 seconds and unplug the USB from the server X1.
Step 8: Now the system will have the parameters that you have chosen in the configuration.
HOW TO EDIT
eve.settings.txt
NETWORK_MODE=STATIC
Choose between STATIC or DHCP*.
ETWORK_IP=192.168.99.10
Choose your desired IP.
NETWORK_MASK=255.255.255.0
Choose your desired Subnet Mask.
NETWORK_GATEWAY=192.168.99.1
Choose your desired Gateway.
NETWORK_DNS1=192.168.99.1
Choose your 1st DNS SERVER.
NETWORK_DNS2=8.8.8.8
Choose your 2nd DNS SERVER
*If NETWORK_MODE is equal to DHCP the system will be set in DHCP.
DB RESTORE AND REPLACEMENT
Note: If a file “db.eve” is present in the root of USB key it will replace the current PROJECT inside EVE X1 Server. You can use this method to install the same project on multiple server.