Select Page

HOW TO CREATE A MQTT GATEWAY PROTOCOL WITH THE EVE AUTOMATION SOFTWARE

INTRODUCTION

In this guide is explaned how to setup the MQTT protocol inside the Ilevia’s configuration software ilevia Manager.

Note: Make sure to have the latest version of ilevia Manager. You can download the software from our website here.

Protocol configuration

Step 1:

Open Eve Automation software and enter the gateway tab, then click the plus icon on the top right of the page, as shown in the picture below.

Eve automation software| gateway set up
Step 2:

Click the tab that poped up and select the MQTT broker protocol from the drop down menu.

Eve automation software| gateway set up
Step 3:

 1. Put the IP address of the broker and the port, the default open port is 1883.

 2. The server IP address can be set also as localhost.

 3. Set the Quality of Service (QoS) to 2.

How to set the MQTT protocol inside Eve automation system

Discover more about our Shelly dedicated solution.

Still Need Help? Our Customer Service Is Here For You.