by Filippo Amabilia | Jun 17, 2020 | All Archives, Configuration Software
MODBUS-RTU & MODBUS-TCP Gateway’s parameters MODBUS RTU/ASCII GATEWAY’S PROPERTIES Select device: The option called Ilevia X1 port A indicates the left RS485 port on the X1 Server, port B indicates the right port of the X1 Server; Boud rate: Set the boud...
by Filippo Amabilia | Jun 17, 2020 | All Archives, All Archives, Configuration Software, Online Services, Online Services, Configuration Software
HTTP gateway’s parameters GATEWAY’S PROPERTIES Name: Enter the title for your KNX gateway; Protocol: Choose the protocol to match with the gateway; Enable: It allows to enable /disable the selected gateway; Address: enter the device IP address; Port: Enter the...
by Filippo Amabilia | Jun 17, 2020 | All Archives, Configuration Software
Datagram gateway’s parameters INTRODUCTION The gateway is created to let EVE communicate with IRTrans devices. These devices can be controlled via the Scenario components where the commands configured inside the device can be inserted. COMMON PROPERTIES Name: Enter...
by Filippo Amabilia | Jun 16, 2020 | All Archives, Configuration Software
EL.MO. Intrusion Detection INTRODUCTION It allows you to control and monitor some central units of EL.MO. the gateway will be created automatically once you create the EL.MO component inside the Component tab. USE CASES This component take part when having a EL.MO...
by Filippo Amabilia | Jun 16, 2020 | All Archives, Configuration Software, Uncategorized
Parametri gateway Vivaldi Multiroom Giove CA20/21 INTRODUZIONE Questo gateway si creerà automaticamente dopo aver trascinato all’interno dela sezione “Componenti” il componente Vivaldi Multiroom giove Giove CA20/21. Tutti i parametri sono...
