Lock

INTRODUCTION

Similar to switch component, however it is necessary to enter a security code in order to change the state of an actuator.

USE CASES

• You can add more protection to the entrance door with a password that will allow only the authorize users to open it.
• you can use the lock component to set a password for an IP camera so only the authorized user can see it.

COMPONENT’S PROPERTIES

Password component: In this field we recommend to use the Info component. Remember to enable the checkbox Save the last value into the component properties;

Reset password: Using the Pulse component allows the user to reset the password in the Eve Remote Plus App;

Password request: See the options below:

• “Always“ The password will be requested in both lock and unlock action.
• “On activation” The password will be requested only in the unlocking action.
• “On deactivation” The password will be requested only in the locking action.

Password text entry: Allows the user to type the password, we recommend using the Text entry component;

Password: You can fill this text field with your personal password to unlock the component;

Reversed value: The component will be unlocked when at 0 and locked when at 1;

KNX

This component’s sample is made by using KNX gateway.

Please refer to “Gateways / Protocols” guide in order to get further info.

Virtual Feedback: Please refer to “KNX protocol” guide;

Read bus value on startup: Please refer to “KNX protocol” guide;

Write / Feedback address: Please refer to “KNX protocol” guide

EVE Remote Plus

Three different view mode possibilities: “CLASSIC”, “MODAL” and “HIDDEN”. Learn more about component’s view modes.

CLASSIC VIEW MODE

Here is the visual result of the component on EVE Remote (Classic Style).

The lock is displayed as an icon which lights up when unlocked within the correct password.

Doors, Safes, etc. ⇒ Lock mask

  State Off – Lock (Customizable icon)

  State On – Unlock (Customizable icon)

 Password field  (lock/unlock mask)

Here is the visual result of the component on the EVE Remote (Classic Style).

After typing the correct password you can change the old password by clicking the Pulse icon. After that, you can type in the “Change password” field the new one.

Password reset procedure

Pulse Icon (click/tap for the start/reset procedure)

 Type your new password in this field.

MAP VIEW MODE

This is just one of the visual result possibilities of the component on the EVE Remote (Map Style).

Icons can be customized depending on your necessities from symbol to color and dimension.

In this case, we can see the default icon layout:

Doors, Safes, etc. ⇒ Lock icon

State Off – Lock (Customizable icon)

State On – Unlock (Customizable icon)

 Password bar  (lock/unlock mask)

TEST THE COMPONENT YOUR SELF

Consul the following guide to have further information of the complete configuration of the Lock component.