by Filippo Amabilia | Apr 16, 2020 | All Archives, Configuration Software
Load Note: This component turns out to be necessary during the configuration of the Load control plugin module. INTRODUCTION This component is necessary for the configuration of the Load control plugin module. Use this component to define each new load, setting power...
by Filippo Amabilia | Apr 15, 2020 | All Archives, All Archives, Configuration Software, Configuration Software
Chart INTRODUCTION This component allows you to create graphs using gathered information and to display them in the user interface. Each information deriving from a sensor, or counter, or switch can be used to be represented in a chart. USE CASES With the Chart...
by Filippo Amabilia | Apr 14, 2020 | All Archives, Configuration Software
Set point INTRODUCTION This component can be set to control a setpoint of a thermostat or the airflow of a fan. USE CASES You can use the set point to controll a thermostat for example. COMPONENT’S PROPERTIES Min: Minimum value that the setpoint can reach;...
by Filippo Amabilia | Apr 9, 2020 | All Archives, Configuration Software
RGB Light INTRODUCTION It represents an RGB light color. This component allows you to control any kind of RGB light. USE CASES With this component you can control RGB lights with several protocols, for example you can use it to control a KNX RGB light....
by Filippo Amabilia | Apr 9, 2020 | All Archives, All Archives, Configuration Software, Configuration Software
KNX GATEWAY GATEWAY’S PROPERTIES Name: Enter the title for your KNX gateway; Protocol: Choose the protocol to match with the gateway; Enable: It allows to enable /disable the selected gateway; Device: Select the type of device, this option depends on which...
