NUKI SMART LOCK INTEGRATION WITH THE ILEVIA'S HOME AUTOMATION SYSTEM INTRODUCTION The Nuki smart lock (Pic. 1) allows to lock and unlock a door remotely. In this guide it's explained how to integrate this Nuki's product with the Ilevia's Home Automation system through...
SEARCH IN ALL ARCHIVES:
IFTTT component
IFTTT INTRODUCTION This guide explains how to set up components with the IFTTT service through the new IFTTT component that you can find within the EVE Manager's Component's library inside the Voice control Alexa/Google section. This component replaces the classic...
X1 server’s VPN connection
X1 SERVER VPN SETUP INTRODUCTION There are a wide variety of ways to connect to a specific device remotely: by forwarding the necessary port in the router, using a cloud connection, but connecting via VPN will always be the safest way to do so. That's why with the...
Tecnoalarm
TECNOALARM INTRODUCTION In this guide it will be shown how to integrate your Tecnoalarm central unit with the Ilevia system. The Tecnoalarms central unit TP series compatible with this integration are the following: TP-16-256 TP-64 BUS TP16-512 TP8-96 VIDEO TP8-88...
Ilevia Interactable Telegram messages
HOW TO SEND MULTIPLE TYPE OF TELEGRAM MESSAGES WITH ILEVIA INTRODUCTION In this part of the guide it is explain how to set up multiple kind of messages that can be sent to the recipient. The messages can be sent as multiple selection messages (require a selection from...
Lock sample project
LOCK SAMPLE PROJECT INTRODUCTION This guide explains how to set up a Lock component within the Ilevia's configuration software EVE Manager from scratch. Please refer to the Lock component page for further information. Preparing and loading the project in EVE Manager:...
Hysteresis sample project
HYSTERESIS SAMPLE PROJECT INTRODUCTION In this guide you will learn how to set up a Hysteresis component step by step from scrach. In this guide the Hysteresis function will be used to turn on a group of lights based on the lux index coming from a external sensor....
Linker sample project
LINKER SAMPLE PROJECT INTRODUCTION In this guide shows an example of to configure the Linker component to turn On a group of light.Preparing and loading the project in EVE Manager: unzip the file; open EVE Manager, go to the top left, File – Open – press “Ok” on the...
X1 server SD restore procedure
X1 SERVER SD RESTORE PROCEDURE INTRODUCTION In this guide it is explaned how to restore the SD card of the Ilevia X1 server to its default settings. Before continuing with the guide we suggest to watch this video tutorial which explain how to extract the SD card from...
Custom widget motion sensor scritp
MOTION SENSOR WITH COUNTDOWN WITH THE CUSTOM WIDGET INTRODUCTION In this guide it will be explained and shown how to configure a motion detection logic that, once triggered, will turn on a light and after a centrain period of time will turn it off automatically, This...
Shelly Motion Integration with Ilevia
SHELLY MOTION INTEGRATION WITH ILEVIA INTRODUCTION The Motion is a device from the first generation of Shelly devices. This device other than notifying that a motion is dected, can either report if a vibration is detected as well as the lux value and much more. In...
Shelly Plus H&T integration with ilevia
SHELLY PLUS H&T INTEGRATION WITH THE ILEVIA SERVER INTRODUTION This Shelly's device from the second generation of products of the "Plus" generation, allows to have a complete mesure of the temperature and Humidity of the enviroment where the device has been place in....
TV LG
TV LG INTRODUCTION This component allows to integrate any smart LG TVS with the Ilevia server. The available actions are multple among them are: Volume up/down, Channel up/down, source change and many more. USE CASES The user wants to integrate his LG TV in order to...