GATEWAYS / PROTOCOLS INTRODUCTION The “gateway” perform the function of the translator: it allows communication between protocols of any type. A gateway typically consists of a physical device that converts various types of BUS (KNX / EIB, RS485, RS232) to Ethernet...
SEARCH IN ALL ARCHIVES:
Shutter
Shutter INTRODUCTION It allows you to control shutter actuators. USE CASES You will need this component in case having a shutter to control or blind. This component allows you to open close and set the rotation of the blinds with only a click. COMPONENT'S PROPERTIES...
Seeker
Seeker INTRODUCTION Used to call two scenarios with a dedicated graphics component. For example, to switch to a previous and next track of a CD player. The scenarios may be of any type, they can send different infrared or call the component feed track Vivaldi...
Changeable value
Changeable Value INTRODUCTION This component is similar to the slider component. However, it shows the actual component’s value on the BUS rather than being a percentage. It may indicate a level of LUX of a sensor. It can also be used to set a brightness threshold to...
Text info
Text Info INTRODUCTION It allows you to see different texts with different colors on the EVE Remote user interface according to the On / Off status value. USE CASES You an use the text info component to make customized text feedbacks to link to other components such...
Drop down
Drop Down INTRODUCTION It allows you to create a list of options selectable by the user on EVE Remote. USE CASES With the drop down component you can create a menu with several modes to control a thermostat, for example in confort mode or winter or summer....
Slider
Slider INTRODUCTION The slider is the component that represents a percentage. The percentage control of a dimmer is performed by the Slider. If it is necessary to indicate a value other than 100 as the maximum value, you can change the default settings. It is also...
Lock
Lock INTRODUCTION Similar to switch component, however it is necessary to enter a security code in order to change the state of an actuator. USE CASES You can add more protection to the entrance door with a password that will allow only the authorize users to open it....
Color info
Color Info INTRODUCTION This component shows the On / Off status of a specific source using colored icons. USE CASES The color info can be used as changing value visualizer for the movement sensors, as soon as the movement sensor picks up a movement in its range the...
Dimmer
Dimmer INTRODUCTION Dimmers are devices used to control the brightness of lights. By changing the voltage waveform applied to the lamp, it is possible to control the intensity of the light output. USE CASES The user can combine two components to create one complete...
Switch
Switch INTRODUCTION It can represent the On / Off state of a sensor, it can command an actuator changing the parameter's value. Also, it can be used as input of AND / OR logic, as a system command to activate scenarios or it can be controlled by weekly timers to...
Pulse
Pulse INTRODUCTION It sends an On / Off pulse once triggered from the User. The pulse component will return to its original state once released. USE CASES The pulse component can be used as a trigger component for a scenario. The pulse component can used to open a...
Info
Info INTRODUCTION It represents a generical information, any value in the system is read and managed through this component. USE CASES The user can set this component to read the temperature of a thermostat. The user can use the info component can display how much...