(+39) 0424.166.02.08 support@ilevia.com

Server X1 firmware update

EVE X1 SERVER FIRMWARE UPDATEPlease follow the steps below: Step 1: Power on the hardware unit Step 2: Connect the unit to the LAN network Step 3: Launch your internet browser and open a new tab Step 4: Type http://www.ilevia.com/evelocalip.php on the URL bar The...

X1 server network configuration

X1 NETWORK CONFIGURATIONWhen connecting for the first time, connect the LAN network adapter to the network then connect the power supply. The server will then boot from the on board card (from the MicroSD card for Raspberry Pi) which stores all the firmware and user...

Server X1 wiring

X1 SERVER WIRINGThis section will give you an overall basic understanding of how a EVE X1 Server is wired. If you have any questions or doubts during the installation process then please feel free to get in touch with our support team. Our technicians are always happy...

Project upload from USB to server X1

HOW TO UPLOAD A PROJECT ON MULTIPLE SERVERS USING A USB KEY1. Format a USB key using SD Card Formatter 2. Save your current project inside EVE Manager Pro with the name db.eve   3. Move your db.eve file inside the USB key that you have just formatted 4. Turn off...

X1 server IP restore

HOW TO RESTORE FACTORY IP SETTINGS (STATIC/DHCP)If you can no longer connect to your Server (e.g. can’t connect through IP), you can reset your IP with this guide. You can reset it using a STATIC IP or DHCP IP.PREPARE YOUR USB KEYStep 1: Format a USB Key in FAT32....

Specification

SERVER SPECIFICATIONS INTRODUCTION The EVE X1 server is the device that allows you to interact to all the domotics componets inside your home. This is how it's made with all the connectors.Server specification: ON BOARD INPUT/OUTPUT 1x RJ45 Ethernet interface 1x USB...