(+39) 0424.166.02.08 support@ilevia.com

WEB CONFIGURATION PANEL

Connection and configuration

Step 1: CONNECTING TO THE MAIN PAGE

Open your web browser and type the IP of your server in the URL bar on top, if you don’t know what’s your server’s IP please click this link to find it out.

How to connect into the Web interface of the EVE server in the network

troubleshooting: 

– If the browser doesn’t display this page we suggest to check if the ethernet plug is in the right place and if the X1 server device is connected to the same network.

 – If you brought your X1 device  outside your network you can check the ip by using a open source ip scanner that you can find free online. If you can’t find it that it by using an ip scanner you will need to restore IP so check out our  giude.

Step 2: LOGIN

Once connected to the X1 server web page, we can proceed to put the username and the password in it’s own login section.

Note. The default password is “password” however we suggest to edit it once the project will be defined (please refer to “Multiuser management” guide).

How to login insde the configuration settings throught the EVe Server web interface

Step 3: CONFIGURATION PANEL

Once succesfully logged in, the web configuration panel menu will be displayed like this, here you can find the access of all the configuration settings e diagnostic. The dignostic icon if clicked will display you a page where all the options to set every kind of setting of the device.

How to reach the configuration settings within the web interface of the EVE server

Step 4: NETWORK CONFIGURATION

First thing that we are going to set are the network settings, so in order to reach them click on the settings icon and then select network.

How to reach the network configuration settings of the device inside the web interface of the EVE server

Step 5: PROVIDING A STATIC IP TO THE EVE SERVER

This is the panel you need to use in order to assign a static IP to EVE inside your network, then unflag the “use DHCP” option. To save you changes remeber to select the button below “Apply changes”. After doing this the new setting will be saved.

How to set the static IP address inside the web interface of the EVE server

Step 6: ZONE DATE AND TIME

This is the date time setting panel. It is very important to set time and date due to the role that this will play. In fact this setting is the one that EVE will consider when timers will be concerned on specific scene execution. Set time zone, date and time.

This below is a list of servers set by default where connect to update the time. You are free to make changes. Remeber to select the button below “Apply changes”, then reboot the system to save the settings that you’ve changed.

How to set the zone date and time inside the web interface settings of the EVE Server