Select Page

SEARCH IN SHELLY:

How to set up Shelly 4 pro in EVE automation software

SHELLY 4 PRO WITH MQTT INTRODUCTION Shelly 4 pro is a device that allow you to control the consumption of a light, four channel din that can control up to 4 separate channels. This device has four channel din that can be mounted easily inside your electrical...

How to set up Shelly flood in Eve automation software

SHELLY FLOOD WITH MQTT PROTOCOL INTRODUCTION:  This guide will explane how to set the shelly flood device with MQTT. This device is used to record temperature of floods and allert in case it has been set as flood detector. This device need a 3V CR123A battery for the...

How to set up shelly dimmer in Eve automation software

HOW TO SET UP SHELLY DIMMER WITH MQTT INTRODUCTION: This shelly device allow you to control a the dimming of a light. It can Turn on/off a light and control the fading all in one device.Step 1: After wiring the device as expalned in the shelly cloud web site, connect...

How to create a new MQTT gateway inside the EVE manager

HOW TO CREATE A MQTT GATEWAY PROTOCOL WITH THE EVE AUTOMATION SOFTWARE INTORDUCTION In this guide is explaned how to create a MQTT gateway inside Eve Autation software. Note:Make sure to have the last version of Eve manager pro and the logics updated at the last...

How to set up Shelly 1/1pm in Eve automation software

SHELLY 1/1pm WITH MQTT PROTOCOL INTRODUCTION Shelly 1/1pm are devices from shelly that allow you to turn on/off a switch through remote actions. They have different names but the function is the same. Shelly's device web interface configuration Step 1: Connect to the...