(+39) 0424.166.02.08 support@ilevia.com

SEARCH IN SHELLY:

MQTT-SHELLY

HOW EVE AUTOMATION SOFTWARE WORKS WITH SHELLYMqtt is a low weight publish-subscribe protocol. This protocol is made by two parts: The client (someone connecting to a broker). The broker (the one who has the credentials of all the users and allow you to connect trade...

How to set up the MQTT fx software

HOW TO SET THE MQTT DEBUG SOFTWARE MQTT FX INTRODUCTION This gudie will show you how to set the MQTT debug software MQTT fx. This software allows to check if the commands that we send from Eve automation app have been set propely Download the software from this...

Topic and payload

HOW DO THE PAYLOAD AND THE TOPICS WORK? TOPICS The topics are: read, event, write and response. Each topic has a different type of message that the MQTT broker uses to filter messages for each connected client, the topics are composed in levels divided by slash....

How to set up a shelly em in EVE automation software

SHELLY ENERGY METER WITH MQTT INTRODUCTION This device from Shelly allow you to monitor the energy consumption of a specific wire. In  this guide is explained how to set up this device via MQTT. Web interface configurations Step 1: Connect to the shelly device hot...

How to up Shelly plug-s in Eve automation software

SHELLY PLUG WITH MQTT PROTOCOL INTRODUCTION In this guide is explaned how to set up the MQTT protocol inside the shelly plug device. You can find further informations about the topics in the shelly website.Step 1: Connnect inside the shelly's wifi network, type the...

How to find the device ID inside the shelly web interface

HOW TO FIND THE DEVICE ID INSIDE THE SHELLY WEB INTERFACE INTRODUCTION This guide will show you how to find the device id. You will need it to set the topics. In the picture below is shown how to find your shelly device id.Step 1: The first step will be connecting to...