(+39) 0424.166.02.08 support@ilevia.com

ILEVIA – KNX POWER SUPPLY, 640 MA

DESCRIPTION

EIB/KNX power supply produces and monitors EIB / KNX system voltage. The bus line is decoupled from the power supply with the integrated choke. The power supply is connected to the bus line with a bus connection terminal. A reset is triggered by pressing the reset push button and lasts 22 seconds (regardless of the duration of the push button action). The bus line disconnected from the power supply and the devices connected to this bus line are returned to their initial state. If the line should be disconnected for a longer period, the bus connection terminal must be removed from power supply. A 30V DC auxiliary voltage is made available via an additional connection terminal. This voltage can be used to supply a further bus line (in connection with a separate choke).

BASIC INFORMATION
Power supply 30 V DC +1 / -2 V, SELV
Protection type IP 00, EN 60529
Dimension 90 x 108 x 60 mm (H x L x D)
Weight 300 g

 

N.B: Go to the DOWNLOADS section to download the complete datasheet.

FUNCTIONS / CHARACTERISTICS

  • Provide sustainable power to other KNX equipments of the same line
  • Short circuit protection to other devices installed on the KNX line
  • Protect other KNX devices by stabilizing input voltage and current

PURCHASE INFORMATION

Order Code: ILE-KNX-A00-PS640