(+39) 0424.166.02.08 support@ilevia.com

SEARCH YOUR POST HERE:

ETS gateway

KNX GATEWAY TUNNEL FOR ETS DESCRIPTIONThe KNX Gateway connects a PC to an EIB / KNX system via the EIB socket on our X1 servers in order to configure, parameterize and commission the EIB / KNX installation and the bus monitor using the ETS.This diagram represents a...

Add / remove gateway

Add/Remove a new gatewayStep 1: Click on the “+” icon on the top right of the Gateways area or click right button with your controller.ORStep 2: Once done, properties of the selected gateway will be displaied on the Gateway’s properties area on right. Enter a new name...

Timed thermostat

Timed Thermostat INTRODUCTION It allows the user to schedule the temperature of a thermostat. USE CASES The user can control the thermostat and make any sort of timed configuration to suite its own house schedulement COMPONENT'S PROPERTIES Min (value): Minimum value;...

Modbus-gateway

MODBUS-RTU & MODBUS-TCP Gateway’s parameters MODBUS RTU   COMPONENT’S PROPERTIES Select device(dropdown): ilevia X1 port A indicates the left port of the X1 Server, port B indicates the right port of the X1 Server;                              ...

HTTP gateway

HTTP gateway’s parameters COMMON PROPERTIES Name (field): enter the title for your KNX gateway; Protocol (drop down): choose the protocol to match with the gateway; Enable (check box): it allows to enable /disable the selected gateway;Address: enter the device IP...

Datagram gateway

 Datagram gateway’s parameters   INTRODUCTION The gateway is created to let EVE communicate with IRTrans devices. These devices can be controlled via the Scenario components where the commands configured inside the device can be inserted. COMMON PROPERTIES Name...

EL.MO Gateway

EL.MO. Intrusion Detection INTRODUCTION It allows you to control and monitor some central units of EL.MO. the gateway will be created automatically once you create the EL.MO component inside the Component tab. USE CASES  This component take part when having a EL.MO...

Recorder

Recorder Note: This component turns to be necessary during the configuration of Chart plugin module. INTRODUCTION This component keeps track of data from sensors, counters and switches. The store of information can be used later by other components, such as the Chart...

Legrand / Bticino gateway

Legrand/BTicino gateway’s parameters COMMON PROPERTIES Name (field): enter the title for your Legrand/Bticino gateway; Protocol (drop down): choose the protocol to match with the gateway; Enable (check box): it allows to enable /disable the selected gateway;  ...

Vimar gateway

Vimar gateway’s parameters COMMON PROPERTIES Name (field): enter the title for your KNX gateway; Protocol (drop down): choose the protocol to match with the gateway; Enable (check box): it allows to enable /disable the selected gateway;Address (field): IP address of...

Open browser

Open Browser INTRODUCTION Tapping the corrispondent icon on EVE Remote user interface, it opens the default browser of your device to the page indicated on the component’s configuration. USE CASES The user wants to check the weather conditions before scheduling the...

Web page

Web Page INTRODUCTION It allows you to add a web page into the EVE Remote user interface. USE CASES The user wants to check a specific web page without going out the App. COMPONENT'S PROPERTIES URL This component’s sample is made by using WEB gateway. Please refer to...

Weather station

Weather station INTRODUCTION It allows to predict the conditions of the atmosphere for a given location. USE CASES The user wants to have rain prediction before scheduling the irrigation cicles. COMPONENT'S PROPERTIES Customizable component’s title and icon. Please...