WEB CONFIGURATION PANEL
Connection and configuration
Step 1: CONNECTING TO THE MAIN PAGE
Open your web browser and type the IP of your server in the URL bar on top, if you don’t know what’s your server’s IP please click this link to find it out.
– If the browser doesn’t display this page we suggest to check if the ethernet plug is in the right place and if the X1 server device is connected to the same network.
– If you brought your X1 device outside your network you can check the ip by using a open source ip scanner that you can find free online. If you can’t find it that it by using an ip scanner you will need to restore IP so check out our giude.
Step 2: LOGIN
Once connected to the X1 server web page, we can proceed to put the username and the password in it’s own login section.
Note. The default password is “password” however we suggest to edit it once the project will be defined (please refer to “Multiuser management” guide).
Step 5: PROVIDING A STATIC IP TO THE EVE SERVER
This is the panel you need to use in order to assign a static IP to EVE inside your network, then unflag the “use DHCP” option. To save you changes remeber to select the button below “Apply changes”. After doing this the new setting will be saved.
Step 6: ZONE DATE AND TIME
This is the date time setting panel. It is very important to set time and date due to the role that this will play. In fact this setting is the one that EVE will consider when timers will be concerned on specific scene execution. Set time zone, date and time.